All resources
Bathroom & Shower

What do I need to build a tile shower?

From the pan to the drain — a complete materials list.

By the JR Works LLC team Gladewater, TX

From the pan to the drain — a complete materials list.

A leak-free tile shower starts with a waterproof assembly: a sloped pan or tray, a bonded waterproof membrane, and a drain that ties the waterproofing to the plumbing. A Schluter Kerdi-Shower Kit bundles these core pieces together.

On top of the waterproofing you need setting mortar (thin-set) to bond the tile, the tile itself, and grout. For floors and wet walls, use a polymer-modified thin-set rated for porcelain and a grout suited to wet areas.

Finish the shower with a linear or square drain, trim profiles at edges and curbs, and sealant at the corners and drain. Skipping the waterproofing or using the wrong thin-set is the most common cause of early shower failures.

Key takeaways

  • Start with a waterproof assembly: sloped pan, bonded membrane, and drain.
  • Use polymer-modified thin-set and wet-area grout rated for porcelain.
  • Finish with trim profiles and sealant at corners, curbs, and the drain.

JR Works LLC Resource Center

Practical guidance from your East Texas flooring & remodeling team.

Ask a question

Ready to see it in person?

Stop by the Gladewater showroom or give us a call.